Stabilizer Bushing Installation Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Verify the installation direction of the stabilizer bushing.

Fig 1: Installing Stabilizer Bushing (1 Of 2)
Courtesy of MAZDA MOTORS CORP.
Widen the stabilizer bushing opening 0.7-1.0" (16-26 mm) and install the bushing to the front stabilizer as shown in the illustration.

Fig 2: Installing Stabilizer Bushing (2 Of 2)

Courtesy of MAZDA MOTORS CORP.