LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2003 >> Impala Police >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Heated Seat Control Module Replacement - Front >> Removal Procedure

Removal Procedure

  1. Position the seat to the full-up position.
  2. Remove the bolts that secure the front seat frame to the floor.
  3. Rotate the seat forward to access the heater module.
  4. Disconnect the seat electrical harness connector.
  5. Disconnect the heater control module from the seat frame by sliding the control module toward the front of the seat.
    6. Fig 1: Electrical Harness Connector & Heater Module
    GM816209Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical harness connector (1) from the heater module (2).
  7. Remove the heater module from the front seat.
scientia non olet · About LEMON Manuals