LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2000 >> Tracker 4D Utility, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Theory and Operation >> Engine Controls - Theory & Operation >> Computerized Engine Controls >> Input Devices >> Crankshaft Position Sensor

Crankshaft Position Sensor

The Crankshaft Position (CKP) sensor is mounted on engine block, behind crankshaft pulley (1.6L) or behind flexplate (2.0L). CKP sensor consists of a pick-up coil and magnet. CKP sensor generates an AC voltage signal as signal rotor on crankshaft timing belt pulley rotates. This signal is sent to PCM and is used to monitor misfire conditions.

scientia non olet · About LEMON Manuals