Cylinder Block Assembly: Specifications
VIN G,4, Bore Dimensions| Cylinder Bore Diameter (Standard) | 3.5036-3.5043 Inch (in) |
| Cylinder Bore Taper Maximum | 0.0005 Inch (in) |
| Cylinder Bore Out of Round Maximum | 0.0005 Inch (in) |
| Cylinder Bore Diameter (Standard) | 3.5036-3.5043 Inch (in) |
| Cylinder Bore Taper Maximum | 0.0005 Inch (in) |
| Cylinder Bore Out of Round Maximum | 0.0005 Inch (in) |