LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XT5 Base, FWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection 
  2. Warm Up Three-Way Catalytic Converter- Bank 2 - Remove - Warm Up Three-Way Catalytic Converter Replacement (Bank 1, LGX) , or Warm Up Three-Way Catalytic Converter Replacement (Bank 2, LGX)
  3. GM4287567Courtesy of GENERAL MOTORS COMPANY

    Knock Sensor- Bank 2 (1) - Remove - Knock Sensor Replacement - Bank 2

  4. GM4286549Courtesy of GENERAL MOTORS COMPANY

    Starter Heat Shield (2) - Remove - Starter Shield Replacement 

  5. GM4286416Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Cable Nut (1) @ Starter Solenoid - Remove

  6. Battery Positive Cable Conduit Fastener - (3) Remove
  7. Battery Positive Cable (2) - Remove
  8. GM4287534Courtesy of GENERAL MOTORS COMPANY

    Starter Mounting Bolt (1) - Remove [2X]

  9. GM4287535Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1) - Disconnect

  10. Remove the starter. (2)
scientia non olet · About LEMON Manuals