HVAC Control Module Replacement

Fig 1: View Of HVAC Control Assembly & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the instrument panel accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (Except Cadillac) or Instrument Panel Accessory Trim Plate Replacement (Cadillac) . Remove the accessory switch assembly. Refer to Accessory Switch Replacement (Except Cadillac) or Accessory Switch Replacement (Cadillac) . Disconnect the electrical connectors.
1	Screw, Control Assembly - Heater and Air Conditioning (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 1.5 N.m (13 lb in)
2	Control Assembly, Heater and Air Conditioning Tip: The HVAC control module must be reprogrammed. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure

Screw, Control Assembly - Heater and Air Conditioning (Qty: 4)

NOTE: Refer to Fastener Notice .

Tighten: 1.5 N.m (13 lb in)

Control Assembly, Heater and Air Conditioning
Tip: The HVAC control module must be reprogrammed. Refer to Control Module References .