LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> Escalade EXT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.8L, 5.3L & 6.0L - Introduction >> Repair Instructions >> Knock Sensor (KS) Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Rubber Covers
    GM832149Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical-4.8L, 5.3L, and 6.0L.
  2. Gently pry up the rubber covers.
  3. Disconnect the knock sensor electrical connectors.
    4. Fig 2: View Of Knock Sensors
    GM309864Courtesy of GENERAL MOTORS CORP.
  4. Remove the knock sensors.
scientia non olet · About LEMON Manuals