LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> CTS V6-3.6L VIN 7 >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair >> Dash Integration Module Replacement

Dash Integration Module Replacement



DASH INTEGRATION MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the instrument panel (I/P) closeout panel.
2. Disconnect the closeout panel light electrical connector (1).
3. Remove the screws securing the dash integration module (DIM) to the I/P.
4. Disconnect the electrical connectors.

INSTALLATION PROCEDURE




1. Connect the electrical connectors to the DIM.
2. Install the screws securing the DIM to the I/P.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (80 lb in).

3. Connect the closeout panel light electrical connector (1).
4. Install the I/P closeout panel.
5. Program the module. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) Body Control Module (BCM) Programming/RPO Configuration (RIM). Programming and Relearning
scientia non olet · About LEMON Manuals