LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> XLR >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pulley Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Power Steering Pump Pulley Installer
    GM643361Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The pulley must be installed onto pump shaft so that the pulley hub is flush with the pump shaft.
  1. Using the J 25033-C  , install the power steering pump pulley onto the power steering pump.
  2. Install the accessory drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 4.6L (LH2).
scientia non olet · About LEMON Manuals