LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Dash Integration Module Replacement (RHD) >> Removal Procedure

Removal Procedure

    Fig 1: View Of DIM Module & Electrical Connectors
    GM488279Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Before replacement of the DIM module (1), record the personalization settings in order to transfer the settings after the DIM module (1) has been replaced.
  1. Remove the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left (LHD) or Closeout/Insulator Panel Replacement - Left (RHD) in Instrument Panel, Gages and Console.
  2. Disconnect the DIM electrical connectors (2).
    3. Fig 2: View Of Locking Tab & DIM Module
    GM488281Courtesy of GENERAL MOTORS CORP.
  3. Depress inward on the locking tab (2).
  4. With the locking tab (2) depressed, slide the DIM (1) downward.
  5. Remove the module (1) from the bracket.
scientia non olet · About LEMON Manuals