LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2004 >> Escalade EXT >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Spring Bumper Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Jounce Bumper (4WD 15 Series)
    GM348563Courtesy of GENERAL MOTORS CORP.
  1. Snap the jounce bumper to the mounting cup (4WD 15 Series).
    2. Fig 2: Jounce Bumper (All 25/35 Series And RWD 15 Series With Coil Spring)
    GM348561Courtesy of GENERAL MOTORS CORP.
  2. Install the jounce bumper (All 25/35 Series and RWD 15 Series with coil spring).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the nut to the jounce bumper stud.

    Tighten:  Tighten the nut to 30 N.m (22 lb ft).

  4. Remove the safety stands.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals