Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Install the memory seat module.

Fig 1: Removing & Installing Memory Seat Module-To-Seat Frame Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Iinstall the memory seat module screws (1).
Tighten: Tighten the screws 2 N.m (18 lb in).

Fig 2: Identifying Electrical Connectors At Heated Seat Module

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connections to the module.
Install the front seat cushion. Refer to Seat Cushion Replacement - Front .
Calibrate the seat. Refer to Memory Seat Calibration Procedure