LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2003 >> CTS Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Servicing >> Removal & Installation >> Output Speed Sensor >> Removal

Output Speed Sensor: Removal

  1. Remove the transmission oil pan and filter. See DRAINING & REFILLING  under LUBRICATION.
  2. Disconnect the electrical wiring harness connector (3) from the output speed sensor (2). See Fig 1.
  3. Remove the output speed sensor bolt (3). See Fig 2.
  4. Remove the output speed sensor (2).
  5. Remove the output speed sensor spacer (1).
  6. Inspect the output speed sensor (2) for the following conditions:
    • Damaged or missing magnet.
    • Damaged housing.
    • Bent or missing electrical terminals.
Fig 1: Disconnecting Output Speed Sensor Electrical Connector
G00178438Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing Output Speed Sensor
G00178439Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals