Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Front Bolt (GNA, GNB) | |
|
100 N.m (74 lb ft) |
|
90 - 105 degrees |
| Front Lower Control Arm Rear Bolt (GNA, GNB) | Torque Mating Fastener |
| Steering Knuckle Bolt @ Front Lower Control Arm (GNB) | Torque Mating Fastener |
| Steering Knuckle Bolt @ Strut Assembly (GNA) | Torque Mating Fastener |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Ball Stud Nut (GNA) | |
|
40 N.m (30 lb ft) |
|
120 - 135 degrees |
| Front Lower Control Arm Rear Nut (GNA, GNB) | |
|
100 N.m (74 lb ft) |
|
90 - 105 degrees |
| Front Shock Absorber Yoke Nut (GNB) | 100 N.m (74 lb ft) |
| Front Stabilizer Shaft Bolt (GNA, GNB) | 58 N.m (43 lb ft) |
| Front Stabilizer Shaft Link Nut (GNA, GNB) | 100 N.m (74 lb ft) |
| Front Suspension Mount Upper Bolt (GNA, GNB) | 22 N.m (16 lb ft) |
| Front Suspension Strut Nut (GNA, GNB) | 70 N.m (52 lb ft) |
| Front Wheel Bearing and Hub Assembly Bolt (GNA, GNB) | |
|
100 N.m (74 lb ft) |
|
20 - 30 degrees |
| Steering Knuckle Camber Adjust Nut - Lower (GNB) | |
|
160 N.m (118 lb ft) |
|
45 - 60 degrees |
| Steering Knuckle Camber Adjust Nut - Upper (GNB) | |
|
100 N.m (74 lb ft) |
|
45 - 60 degrees |
| Steering Knuckle King Pin Bolt (GNB) | 7 N.m (62 lb in) |
| Steering Knuckle King Pin Bushing Nut (GNB) | |
|
100 N.m (74 lb ft) |
|
Loosen Both Nuts One Complete Revolution |
|
100 N.m (74 lb ft) |
| Steering Knuckle Nut @ Front Lower Control Arm (GNB) | |
|
160 N.m (118 lb ft) |
|
90 - 105 degrees |
| Steering Knuckle Nut @ Strut Assembly (GNA) | |
|
100 N.m (74 lb ft) |
|
45 - 60 degrees |
| Steering Knuckle Nut @ Front Suspension Strut Yoke Upper Ball Joint (GNB) | |
|
65 N.m (48 lb ft) |
|
30 - 45 degrees |