LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2005 >> Park Avenue Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Repair Instructions >> Ignition Coil(s) Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the spark plug wires from the coil assemblies.
    2. Fig 1: View Of Ignition Coil Module And Module Mounting Bracket
    GM12299Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws (1) securing the coil(s) to the ignition control module.
  3. Remove the coil(s) (2) from the ignition control module (3).
scientia non olet · About LEMON Manuals