Scan Tool Data Definitions - Dash Integration Module (DIM)
8 Digit GM Part Number: Scan tool displays: part number - Display indicates the part number of the DDM.Battery Voltage: Scan tool displays: volts - Display indicates the battery voltage input, 0 - 30 volts is the operating range.
Calibration ID: Scan tool displays: number - Display indicates the 4 digit calibration ID of the DDM.
Daytime Running Lamp: Scan tool displays: On/Off - Display indicates the commanded state of the daytime running lamp relay.
Flash to Pass Switch: Scan tool displays: On/Off - Display indicates the state of the flash to pass switch.
Head Lamp Switch: Scan tool displays: On/Off - Display indicates the state of the flash to pass switch signal. On indicates the flash to pass headlamps are requested on.
High Beam Output
Incandescent Dim #1: Scan tool displays: On/Off - Display indicates the state of the incandescent lamp ground circuit.
Lights On with Wipers: Scan tool displays: On/Off - Display indicates the state of the wiper/washer system.
Low Beam Output: Scan tool displays: On/Off - Display indicates the commanded state of the low beam relay.
Park Lamp: Scan tool displays: On/Off - Display indicates the state of the park lamp switch.
Park Lamp Relay Output: Scan tool displays: On/Off - Display indicates the commanded state of the park lamp relay.
PROM ID: Scan tool displays: number - Display indicates the 4 digit PROM ID of the DIM.