DDE Fault Code 290900 After Programming (13 02 16)
Publication date: 2016-08-01Reference number: 13 02 16
DDE FAULT CODE 290900 AFTER PROGRAMMING
TECHNICAL SERVICE BULLETIN
| BMW: | F25 (X3 xDrive 28d); F30 (3 Series Sedan 328d); F31 (3 Series Sport Wagon 328d); With the N47T engine |
| GROUP: | Fuel Systems |
SITUATION
The engine has a hesitation and the Service Engine Soon lamp is on after programming the vehicle to an Integration level of 16-07-500.
The following fault code may be stored:
- 290900 - Air system, air to EGR exhaust mass flow plausibility
CAUSE
Unfavorable DDE software application
The fault will be stored if terminal 15 is switched on, and then off, without starting the engine.
CORRECTION
Reprogram vehicle.
PROCEDURE
- Perform diagnosis with the latest version of ISTA.
- Program the vehicle using ISTA/P 3.59.3 or higher.
| Models | Integration Level |
|---|---|
| F25 (X3 xDrive 28d) | 16-07-504 |
| F30 (3 Series Sedan 328d) | |
| F31 (3 Series Sport Wagon 328d) |
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
Always connect a BMW approved battery charger/power supply (SI B 04 23 10 ).
For information on programming and coding with ISTA/P, refer to Centernet/Aftersales Portal/Service/Workshop Technology/Vehicle Programming.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
| Defect Code: | 10 42 31 59 00 |
| Labor Operation: | Labor Allowance: | Description: |
|---|---|---|
| 00 00 006 | Refer to KSD2 | Performing "vehicle test" (with vehicle diagnosis system - checking faults) (Main work) |
| And: | ||
| 61 21 528 | Refer to KSD2 | Connect an approved battery charger/power supply (indicated in KSD2 as "Charging battery") |
| And: | ||
| 61 00 730 | Refer to KSD2 | Programming/encoding control unit(s) |
If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead.
Refer to KSD2 for the corresponding flat rate unit (FRU) allowance.
Vehicle Programming and Coding
Control module failures that occur during programming:
- Please claim these consequential repairs under the defect code listed in this bulletin and use the applicable KSD2 labor operations.
Other Repairs
Control module failures that occur prior to programming:
- When covered under an applicable limited warranty, claim these repairs using the applicable defect code and labor operations in KSD2.