Dynamic Braking Control (DBC)

The DBC function is designed to provide the maximum braking force available during rapid (panic) braking situations. The DSC control module looks at the inputs from the brake pedal switch and the signal from the brake pressure sensor on the master cylinder. The criteria for activation of DBC is how rapidly is the brake pressure built up with the brake pedal depressed. The total criteria required for DBC activation includes:

• Brake switch ON
• Brake pressure build up > threshold value
• Vehicle road speed > 5MPH
• Vehicle not in reverse
• Not all wheels in ABS regulation

If the threshold for DBC activation is achieved, the DSC control module will activate a pressure build up regulation phase through the hydraulic unit. The pressure at all wheels is increased up to the ABS regulation point. This occurs even if the driver does not achieve the ABS regulation point with the pedal.

The rear axle brakes are controlled with select-low regulation and the front axle brakes are controlled individually. ABS regulation will continue until the driver releases the pedal and the pressure in the master cylinder drops below the threshold value stored in the DSC control module.