3.2L - Generic Scan Tool, Engine(S) Code: BHE

• 20 - Fuel Supply
  • Fuel Supply System
    • Fuel Supply System
    • Safety Precautions
    • Rules for Cleanliness
    • Transfer Fuel Pump (FP) G6 Electrical, Checking
    • Fuel Pump (FP) Delivery Quantity, Checking
  • Evaporative Emissions (EVAP) System
    • Evaporative Emissions (EVAP) System
    • EVAP System, Leak Detection
    • Evaporative Emission (EVAP) System, Leak Checking
    • Evaporative Emission (EVAP) Canister Purge Regulator Valve N80 , Checking
    • Evaporative Emission (EVAP) Canister Purge Solenoid Valve 2 N115 , Checking
    • Leak Detection Pump (LDP) V144 , Checking
  • Electronic Engine Power Control (EPC)
    • Electronic Engine Power Control (EPC)
    • Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC)) G187/Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC)) G188 , Checking
• 24 - Multiport Fuel Injection (MFI)
  • Motronic Fuel Injection System, Servicing
    • Motronic Fuel Injection System, Servicing
    • Safety Precautions
    • Rules of Cleanliness
    • Technical Data
  • Components, Checking
    • Components, Checking
    • Oxygen Sensor (O2S) Heater before Catalytic Converter, Checking
      • Oxygen Sensor (O2S) Heater Z19 , Checking
      • Oxygen Sensor (O2S) 2 Heater Z28 , Checking
    • Oxygen Sensor Heater behind Three Way Catalytic Converter (TWC) , Checking
      • Oxygen Sensor (O2S) 1 (behind Three Way Catalytic Converter (TWC)) Heater Z29 , Checking
      • Oxygen Sensor (O2S) 2 (behind Three Way Catalytic Converter (TWC)) Heater Z30 , Checking
    • Mass Air Flow (MAF) Sensor G70 , Checking
    • Throttle Valve Control Module J338 , Checking
      • Notes
      • Checking voltage supply and wiring
    • Engine Coolant Temperature (ECT) Sensor G62 , Checking
      • Notes
      • Testing if display is approx. - 40.0°C:
      • Testing if display approx. 140.0°C:
    • Engine Speed (RPM) Sensor G28 , Checking
    • Intake Manifold Tuning (IMT) Valve N156 , Checking
    • Fuel Injector , Checking
  • Function Tests
    • Function Tests
    • Heated Oxygen Sensor (HO2S) before Catalytic Converter, Checking
      • Heated Oxygen Sensor (HO2S) G39 , Checking
      • Heated Oxygen Sensor (HO2S) 2 G108 , Checking
    • Oxygen Sensor (O2S) behind Three Way Catalytic Converter (TWC) , Checking
      • Oxygen Sensor (O2S) behind Three Way Catalytic Converter (TWC) G130 , Checking
      • Oxygen Sensor (O2S) 2 behind Three Way Catalytic Converter (TWC) G131 , Checking
  • Motronic Engine Control Module (ECM) J220
    • Motronic Engine Control Module (ECM) J220
    • Function
    • Voltage Supply, Checking
    • Motronic Engine Control Module (ECM) J220, Replacing
  • Additional Signals, Checking
    • Additional Signals, Checking
    • Motronic Engine Control Module (ECM) Power Supply Relay J271 , Checking
    • Fuel Pump (FP) Relay J17 , Checking
    • Speed Signal, Checking
    • CAN-Bus Terminal Resistance, Checking
• 26 - Exhaust system, Emission controls
  • Exhaust System Components, Removing and Installing
  • Secondary Air Injection (AIR) System
    • Secondary Air Injection (AIR) System
    • Principle and Function
    • Combination Valve for Secondary Air Injection (AIR), Checking Function and Proper Seal
    • Secondary Air Injection (AIR) Pump Relay J299 , Checking
    • Secondary Air Injection (AIR) Pump Motor V101 , Checking
• 28 - Ignition/Glow Plug System
  • Ignition, Servicing
    • Ignition, Servicing
    • Safety Precautions
    • Test Data, Spark Plugs
    • General Information
    • Camshaft Position (CMP) Sensor , Checking
      • Camshaft Position (CMP) Sensor G40 , Checking
      • Camshaft Position (CMP) Sensor 2 G163 , Checking
    • Camshaft Adjustment Valve , Checking
      • Camshaft Adjustment Valve 1 N205 , Checking
      • Camshaft Adjustment Valve 1 (exhaust) N318 , Checking
    • Knock Sensor (KS) , Checking
      • Knock Sensor (KS) 1 G61 , Checking
      • Knock Sensor (KS) 2 G66 , Checking
    • Ignition Coils with Power Output Stage , Checking
• 34 - Controls, Housing
  • Electrical Components for Regulating Transmission 02E
    • Electrical Components for Regulating Transmission 02E
    • Safety Precautions
    • Selector Lever E313 Voltage Supply, Checking
• 35 - Gears, Shaft
  • Direct Shift Gearbox (DSG) Mechatronic J743
    • Direct Shift Gearbox (DSG) Mechatronic J743
    • Safety Precautions
    • Voltage Supply of Direct Shift Gearbox (DSG) Mechatronic J743 , Checking
  • Additional Signals (Automatic Transmission), Checking
    • Additional Signals (Automatic Transmission), Checking
    • CAN-Bus Terminal Resistance, Direct Shift Gearbox (DSG) Mechatronic J743 to Motronic Engine Control Module (ECM) J220 , Checking
    • CAN-Bus Terminal Resistance, Selector Lever E313 to Motronic Engine Control Module (ECM) J220 , Checking
• ST - Generic Scan Tool
  • On Board Diagnostic (OBD)
    • On Board Diagnostic (OBD)
    • Generic Scan Tool (GST) Manual Contents
    • On Board Diagnostic (OBD) Systems
    • Serial Data Link (MIL) Illumination
    • Controller Area Network (CAN) Data Link
    • Electronic Power Control (EPC) Warning Lamp
  • Diagnostic Modes
    • Diagnostic Modes
    • Diagnostic Modes Description
    • Diagnostic Mode 01: Obtain Data
    • Diagnostic Mode 02: Obtain Operating Conditions
    • Diagnostic Mode 03: Interrogating Fault Memory
    • Interrogating the Fault Memory
    • Diagnostic Mode 04: Reset/Delete Diagnostic Data
    • Diagnostic Mode 05: Check Lambda Test Results
      • Notes
      • Test-A: Oxygen Sensor in front of Catalytic Converter Bank 1 - Sensor 1
      • Test-B: Oxygen Sensor Behind Catalytic Converter Bank 1- Sensor 2
      • Test-A: Oxygen Sensor in front of Catalytic Converter Bank 2 - Sensor 1
      • Test-B: Oxygen Sensor Behind Catalytic Converter Bank 2- Sensor 2
    • Diagnostic Mode 6: Checking Test Results of Components that are not Continuously Monitored
      • Notes
      • Test-ID 01 ($01): Catalytic Conversion (Bank 1)
      • Test-ID 01 ($01): Catalytic Conversion (Bank 2)
      • Test-ID $03 (03): Secondary Air Injection (AIR) System (Bank 1)
      • Test-ID $03 (03): Secondary Air Injection (AIR) System (Bank 2)
      • Test-ID $05 (05): Tank Ventilation System, Tank Vent Valve Function Check
      • Test-ID $05 (05): Tank Ventilation System, Tank Leak Test
      • Test-ID 09 ($09): Coolant Thermostat.
    • Diagnostic Mode 07: Check Test Results of Components that are Continuously Monitored
    • Diagnostic Mode 08: Tank Leak Test
      • Notes
      • Function test
    • Diagnostic Mode 09: Vehicle Information
  • General Diagnosis
    • General Diagnosis
  • Readiness Code
    • Readiness Code
  • Diagnostic Trouble Code (DTC) Tables
    • Diagnostic Trouble Code (DTC) Tables
    • SAE P0xxx DTCs
      • Notes
      • Fuel, air mixture, and additional emissions regulations
      • Fuel and air ratios
      • Ignition system
      • Additional exhaust regulation
      • Speed and idle control
      • Control module and output signals
      • 02E Transmission
    • SAE P1xxx DTCs
      • 02E Transmission
    • SAE P2xxx DTCs
      • Fuel and air mixture, additional emissions regulations
      • Fuel and air ratio
      • Additional emission regulations
      • 02E Transmission
    • SAE P3xxx DTCs
      • Fuel and air mixture, additional emissions regulations
    • SAE U0xxx DTCs
      • Control module and output signals