LEMON Manuals: Even more car manuals for everyone
Home >> American Motors >> 1978 >> Gremlin Base, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Spark Control Systems >> Testing >> TCS System >> Current Supply Test

Current Supply Test

  1. Turn ignition switch on. Disconnect wire from solenoid vacuum valve. See Fig. 7  .
  2. Connect wire lead of test lamp to ground. Touch probe end of test lamp to each terminal of connector. Lamp should light at terminal of Orange wire. If not, ignition feed to TCS system is defective.
scientia non olet · About LEMON Manuals