Without HDS

Open the remote and check for water damage.
- If you find any water damage, replace the remote.
- If there is no water damage, go to step 2.
Replace the remote batteries (A) with new ones, and try to lock and unlock the doors with the remote by pressing the lock or unlock button five or six times.
- If the doors lock and unlock, the remote is OK.
- If the doors don't lock and unlock, go to step 3.
  
  Fig 1: Identifying Remote Batteries
  Courtesy of AMERICAN HONDA MOTOR CO., INC.
Reprogram the remote with the HDS, then try to lock and unlock the doors.
- If the doors lock and unlock, the remote is OK.
- If the doors don't lock and unlock, try and program to another vehicle.
  - If the remote programs to another vehicle, go to B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
  - If the remote will not program to another vehicle, replace it.