Wheel Sensor

FRONT:
Wire To Chassis Bolts 9.8 Nm (7 ft. lb.)
Wire To Knuckle Bolts 9.8 Nm (7 ft. lb.)
Sensor To Knuckle Bolts 22 Nm (16 ft. lb.)
Pulser/Sensor Air Gap 0.4 - 1.0 mm (0.02 - 0.04 inch)

REAR:
Sensor To Knuckle Bolts 22 Nm (16 ft. lb.)
Wire To All Other Components 9.8 Nm (7 ft. lb.)
Pulser/Sensor Air Gap 0.4 - 1.0 mm (0.02 - 0.04 inch)