LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2000 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L VTEC 4-CYL >> Overhaul >> Cylinder Block Assembly >> Piston Pin Removal

Piston Pin Removal

  1. Assemble Piston Pin Tools. Insert Base Spring (07973-6570600) and Base Insert (07GAF-PH60300) into Base (07973-6570500) and attach Base Head (07HAF-PL20102). Adjust Pin Driver Shaft (07973-PE00310) so driver length is 2.035" (51.69 mm). Install Driver Head (07973-PE00320) and Pilot Collar (07LAF-PR30100). Place piston onto Base, and using a Hydraulic Press, remove piston pin. See Fig 1.
  2. When removing or installing piston pin, set piston in press with embossed side facing up. Align lugs on base insert with recessed part of piston.
Fig 1: Removing Piston Pin
G93E00111Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals