Confirming Wake-Up Mode
After confirming sleep mode, turn each of the following switches to ON position and wake up each multiplex control unit.
Door multiplex control unit switches:
- Driver's door key cylinder switch (LOCK/UNLOCK)
- Driver's door lock knob switch (LOCK/UNLOCK)
- Driver's door lock switch (LOCK/UNLOCK)
Driver's multiplex control unit switches:
- Driver's door switch
- Engine hood switch
- Headlight switch
- Hood switch
- Ignition key switch
- Left rear door switch
- Left rear door lock knob switch (UNLOCK)
- Trunk key cylinder switch
- Trunk latch switch
Passenger's multiplex control unit switches:
- Front passenger's door switch
- Front passenger's key cylinder switch (LOCK/UNLOCK)
- Front passenger's door lock switch (LOCK/UNLOCK)
- Front passenger's door lock knob switch (UNLOCK)
- Keyless entry transmitter (LOCK)
- Keyless entry transmitter (UNLOCK)
- Keyless entry transmitter (TRUNK)
- Radio switch (Switch is grounded through radio connector. Test by disconnecting connector from radio.)
- Right rear door switch
- Right rear door lock knob switch (UNLOCK)
If all applications operate properly, wake-up mode is okay. If any multiplex control unit is faulty and cannot wake up, several parts of multiplex system will not operate.