Shift Lever Position Switch: Legend
- Remove front console to access shift lever position switch located on left side of shift lever mechanism. Disconnect shift lever position switch 14-pin connector.
- Loosen 2 shift lever position switch mounting bolts. Slowly slide switch toward rear of vehicle while checking for continuity between shift lever position switch 14-pin connector terminals No. 9 and 12 with shift lever in "P" position. See Figure . Continuity should be present.
- If continuity is not present, go to next step. If continuity is present, shift lever position switch is functioning properly. Tighten 2 shift lever position switch mounting bolts. Ensure vehicle starts with shift lever in "P" position.
- If continuity is not present, check shift lever detent and bracket for damage. If no damage is evident, replace faulty shift lever position switch.