LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Leaf ELE-Electric Engine >> Repair and Diagnosis >> Heating and Air Conditioning >> Testing and Inspection >> Programming and Relearning >> Door Motor Starting Position Reset >> Work Procedure

Work Procedure




DOOR MOTOR STARTING POSITION RESET

Work Procedure


1. PERFORM DOOR MOTOR STARTING POSITION RESET

With CONSULT
1.Turn ignition switch ON.
2.Select "Door Motor Starting Position Reset" in "WORK SUPPORT" mode of "HVAC" using CONSULT.
3.Touch "Start" and wait a few seconds.
4.Make sure the "COMPLETED" is displayed on CONSULT screen.
- INSPECTION END
scientia non olet · About LEMON Manuals