Smart Access System With Push-Button Start

DOOR LOCK: SMART ACCESS SYSTEM WITH PUSH-BUTTON START: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the tester on.

(d) Enter the following menus: Body Electrical / Smart Access / Trouble Codes.

(e) Check the details of the DTC(s) Smart Access System With Push-Button Start.

2. CLEAR DTC

(a) Connect Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the tester on.

(d) Enter the following menus: Body Electrical / Smart Access / Trouble Codes.

(e) Erase the DTCs.